Reinforced Concrete Tilt-Up Panels

$39.95

add to cart Get More With a Subscription! Request a Demo For Your Company

The term tilt-up panel is almost self-descriptive. This method of construction has been utilized through history, but only relatively recently have the advantages become economically viable. A combination of labor savings, speed of construction, and good finish quality, has made tilt-up panels more competitive. The following course will explain the tilt-up panel method of construction, itemize some of the current advantages of this construction method, and give an example of the design of a typical warehouse type building constructed of tilt-up walls.

Objectives SME Course Applies to

Course Objectives

At the conclusion of this course, you will be able to:

Describe reinforced concrete tilt-up wall panel construction and its advantage
Calculate compression loads on tilt up wall from the roof system
Determine transverse loads on the wall from lateral wind pressure
Evaluate for P-Delta effects
Identify transverse wind loads on the overall building
Evaluate the tilt-up wall as a beam column

SUBJECT MATTER EXPERT: Rob Oleck

Dr. Oleck is an independent consulting structural engineer living in Orlando, Florida. He is presently involved in the structural analysis and design of various building structures in and around the Florida area, including hotels, apartment buildings, industrial structures, naval facilities, and specialty structures for the amusement parks. Other past experience includes the analysis and design of various nuclear and hydro-electric power structures including reinforced concrete and earthen dams, and many special nuclear power plant structures.

Dr. Oleck has also served as an Adjunct Professor of Civil Engineering at Syracuse University, where he earned his Ph.D., teaching Engineering Mechanics, Reinforced Concrete Design, and Seismic Analysis and Design. He has also published many technical papers in the fields of structural dynamics, seismic analysis, soil-structure-interaction and design of structures using Insulated Concrete Forms (ICF).

State Licenses

Alaska

AK - Engineer (Health, Safety & Welfare - ,)

Alabama

AL - Engineer (General - ,)

Arkansas

AR - Engineer (General - ,)

Delaware

DE - Engineer (General - ,)

Florida

FL - Contractor, Certified (General - 0611322)

Accreditation: FL DBPR Approved Provider 0001771

FL - Contractor, Palm Beach County (General - 0611322)

Accreditation: FL DBPR Approved Provider 0001771

FL - Contractor, Pinellas County (General - 0611322)

Accreditation: FL DBPR Approved Provider 0001771

FL - Contractor, Registered (General - 0611322)

Accreditation: FL DBPR Approved Provider 0001771

FL - Engineer (General - 0000271)

Accreditation: FBPE Approved Provider 33

FL - Home Inspector (General - 0611322)

Accreditation: FL DBPR Approved Provider 0001771

Georgia

GA - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

GA - Engineer (General - ,)

Iowa

IA - Engineer (General - ,)

Idaho

ID - Engineer (General - ,)

Illinois

IL - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

IL - Engineer, Professional (General - ,)

IL - Engineer, Structural (General - ,)

Indiana

IN - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Kansas

KS - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

KS - Engineer (Health, Safety & Welfare - ,)

Kentucky

KY - Engineer (General - ,)

Louisiana

LA - Engineer (General - ,)

Massachusetts

MA - Construction Supervisor (Elective - CS-9512)

Accreditation: Coordinator: Michael Ojdana ID # CS-CD-000181 If you have any comments about this course offering, please mail them to the Board of Building Regulations and Standards ATTN: Education Coordinator. / 1000 Washington St. suite 710 / Boston, MA 02118

Maryland

MD - Engineer (General - ,)

Maine

ME - Engineer (General - ,)

Michigan

MI - Engineer (General - ,)

Minnesota

MN - Engineer (General - ,)

Missouri

MO - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

MO - Engineer (General - ,)

Mississippi

MS - Engineer (General - ,)

Montana

MT - Engineer (General - ,)

North Carolina

NC - Engineer (General - ,)

North Dakota

ND - Engineer (Health, Safety & Welfare - ,)

Nebraska

NE - Architect (General, Health, Safety & Welfare)

Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program

NE - Architect (General, Health, Safety & Welfare - RV1839-2026)

Accreditation: AIA Registered Provider J315

NE - Engineer (General)

Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program

New Hampshire

NH - Engineer (General - ,)

New Jersey

NJ - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

NJ - Engineer (General - 24GP000006300)

New Mexico

NM - Engineer (General - ,)

Nevada

NV - Engineer (General - ,)

New York

NY - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

NY - Engineer (General)

Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.

Ohio

OH - Engineer (General - ,)

Oklahoma

OK - Engineer (General - ,)

Oregon

OR - Engineer (General - ,)

Pennsylvania

PA - Code Official,Certified (UCC) (General)

PA - Engineer (General - ,)

Puerto Rico

PR - Engineer (General - ,)

South Carolina

SC - Engineer (General - ,)

South Dakota

SD - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

SD - Engineer (Technical - ,)

Tennessee

TN - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

TN - Engineer (Health, Safety & Welfare - ,)

Texas

TX - Engineer (General - ,)

Utah

UT - Engineer (General - ,)

Virginia

VA - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

VA - Engineer (General - ,)

Vermont

VT - Engineer (General - ,)

Washington

WA - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Wisconsin

WI - Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

WI - Engineer (General - ,)

West Virginia

WV - Engineer (General - ,)

Wyoming

WY - Engineer (General - ,)

Professional Organizations

American Academy of Environmental Engineers - AAEES - Member (General - ,)

American Institute of Architects - AIA - Architects (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - Alberta Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - Alberta Engineer (General - ,)

Canada - British Columbia - Residential Builder (General)

Canada - British Columbia Architect (AIBC) (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - British Columbia Engineer (General - ,)

Canada - Manitoba Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - Manitoba Engineer (General - ,)

Canada - New Brunswick Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - New Brunswick Engineer (General - ,)

Canada - Newfoundland and Labrador Engineer (General - ,)

Canada - Northwest Territories and Nunavut Engineer (General - ,)

Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - Nova Scotia Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - Nova Scotia Engineer (General - ,)

Canada - Ontario Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - Ontario Engineer (General - ,)

Canada - Prince Edward Island Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - Prince Edward Island Engineer (General - ,)

Canada - Quebec Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - Quebec Engineer (General - ,)

Canada - Saskatchewan Architect (General - RV1839-2026)

Accreditation: AIA Registered Provider J315

Canada - Saskatchewan Engineer (General - ,)

Canada - Yukon Engineer (General - ,)

International Society of Automation - ISA - Certifications (General)

National Institute for Certification in Engineering Technologies - NICET (General - ,)

Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)