RedVector
RV-10458
Worksite Safety 09: OSHA Materials Storage
Course Objectives
Upon completion of the lesson, participants will be able to:
- List the three main injuries that occur during material handling, storage, use and disposal
- Describe at least two ways to prevent injury when performing manual lifting
- Explain at least three ways to eliminate hazards that may lead to injury when using forklifts, cranes or slings to handle materials
- Describe at least three actions that can reduce or eliminate hazards when storing, using or disposing of materials
SUBJECT MATTER EXPERT: Dan Johnson, CSP (SFI Compliance Inc.)
Dan Johnson, CSP, is an experienced and integrity driven Environmental, Health and Safety (EHS) professional with over 20 years of accomplishments and success on a national level. He is a Certified Safety Professional with the Board of Certified Safety Professionals. Currently the Managing Partner of SFI Compliance Inc. (www.sficompliance.com), he has also been a safety director for two national home builders and a national utility contractor, as well as numerous years as a safety consultant specializing in the construction industry. He is a skillful designer of EHS programs who has effectively executed those programs within a wide range of industries. Dan has expertise in changing the work environment through behavior based safety, while maintaining productivity. His progressive leadership experiences have produced a passion for surpassing objectives and adding value to the organization. He has extensive knowledge working with multiple jurisdictions to ensure compliance, including: OSHA, DOL, DOT, EPA, USACE and some State and Local municipalities.
Dan is also the author of “Jobsite First Aid—A Field Guide for the Construction Industry” and “DeWALT Construction Safety and OSHA Handbook.”
State Licenses
AL - Engineer (General - ,)
AR - Engineer (General - ,)
CA - Water Operator (Grade T1 and D1) (Safety, Technical)
CA - Water Operator (Grade T2 and D2) (Safety, Technical)
CA - Water Operator (Grade T3 and D3) (Safety, Technical)
CA - Water Operator (T4, T5, D4 and D5) (Safety, Technical)
DE - Engineer (General - ,)
FL - Engineer (General - 271)
Accreditation: FBPE Approved Provider 33
GA - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
GA - Engineer (General - ,)
IA - Engineer (General - ,)
ID - Engineer (General - ,)
IL - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
IN - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
KS - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
KS - Engineer (General - ,)
KY - Engineer (General - ,)
LA - Engineer (General - ,)
MA - Electrician (General)
MD - Engineer (General - ,)
ME - Engineer (General - ,)
MI - Engineer (General - ,)
MN - Engineer (General - ,)
MO - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
MS - Engineer (General - ,)
MT - Engineer (General - ,)
NC - Engineer (General - ,)
ND - Engineer (General - ,)
NE - Architect (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NE - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NH - Engineer (General - ,)
NJ - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Engineer (General - ,)
NV - Engineer (General - ,)
NY - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
OH - Engineer (General - ,)
OK - Engineer (General - ,)
OR - Engineer (General - ,)
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General - ,)
PR - Engineer (General - ,)
SC - Engineer (General - ,)
SD - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
TN - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
TN - Engineer (General - ,)
TX - Engineer (General - ,)
UT - Electrician (Professional Education - 21277)
UT - Engineer (General - ,)
UT - Plumber (Core - 21277)
VA - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
VT - Engineer (General - ,)
WA - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
WI - Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
WV - Engineer (General - ,)
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Hospital Association - AHA - Certified Healthcare Facility Manager (CHFM) (General)
American Institute of Architects - AIA - Architects (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
American Institute of Constructors - AIC - Professional Constructor (General)
Association for Facilities Engineering - AFE - Certification (General)
Board of Certified Safety Professionals - BCSP - Certification (General)
BOMI International - RPA, FMA and/or SMA (General)
Building Operator Certification - BOC - Certification (General)
Canada - Alberta Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia Architect (AIBC) (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV1795-2026)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
Canadian Registered Safety Professionals - CRSP (Safety)
Construction Management Association of America - CMAA - (CCM, CACM) (Construction Safety / Ethics)
Institute of Hazardous Materials Management - IHMM - Certification (General)
International Facility Management Association - IFMA - Certified Facility Manager (CFM) (General)
International Maintenance Institute - IMI - Certifications (CMT, CMP, CMM, CWWMT) (General)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)