RedVector RV-10795AW

Structural Insulated Panels (SIPs)

Structural Insulated Panels (SIPs)

1 hr. Online Course

Level: Intermediate

Item#: RV-10795AW

SME: Jill Nelson, PE, SE, LEED AP BD+C

Structural Insulated Panels (SIPs) are a new sustainable structural panelized building material that can be used for roofs, floors, and wall panels. This course will examine various uses and structural limitations on the materials. An exploration of code requirements and constructibility will be included. Design examples will illustrate cost effective approaches to incorporating this new sustainable material.
 
ATTN: This educational offering is recognized by the Minnesota Department of Labor and Industry as satisfying 1 hour of credit toward the required continuing education.
Course Objectives

At the end of this course, you will be able to:

  • Illustrate how to incorporate this material into traditional building construction to provide style, comfort, safety and durability
  • Calculate the demand on the material without sacrificing affordability and life safety
  • Define the code expectations for gravity and lateral performance to provide occupants with adequate protection
  • Address constructibility issues
SUBJECT MATTER EXPERT: Jill Nelson, PE, SE, LEED AP BD+C
Jill Nelson, PE, SE, LEED AP BD+C Photo
Jill Nelson is a registered Civil and Structural Engineer in California and Washington. She earned a Bachelor of Science in Civil Engineering from the University of Nevada, Reno and a Master of Science in Engineering from the University of Washington with an emphasis in Structural Engineering. With over 20 years of experience, she is an accomplished designer of low and mid-rise building constructed of wood, steel and concrete. Through the years her areas of interest has increased to include both new construction and renovation of existing buildings with a focus on seismic rehabilitation. Ms. Nelson is currently an Associate Professor in the Architectural Engineering Department at California Polytechnic State University, San Luis Obispo.
State Licenses
AK - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
AK - Engineer (Health, Safety & Welfare - ,)
AL - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
AL - Engineer (General - ,)
AR - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
AR - Engineer (General - ,)
CO - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
CT - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
DC - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
DC - Engineer (General - CE21800018)
DE - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
DE - Engineer (General - ,)
FL - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
FL - Building Code Administrator (General - 0611748)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Certified (General - 0611748)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Palm Beach County (General - 0611748)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Pinellas County (General - 0611748)
Accreditation: FL DBPR Approved Provider 0001771
FL - Contractor, Registered (General - 0611748)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 0000271)
Accreditation: FBPE Approved Provider 33
FL - Examiner (General - 0611748)
Accreditation: FL DBPR Approved Provider 0001771
FL - Home Inspector (General - 0611748)
Accreditation: FL DBPR Approved Provider 0001771
FL - Inspector (General - 0611748)
Accreditation: FL DBPR Approved Provider 0001771
GA - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
GA - Engineer (General - ,)
HI - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
IA - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
IA - Engineer (General - ,)
ID - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
ID - Engineer (General - ,)
IL - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
IN - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
IN - Engineer (General - Board Approved - CE21800018)
KS - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
KS - Engineer (Health, Safety & Welfare - ,)
KY - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
KY - Engineer (General - ,)
LA - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
LA - Engineer (General - ,)
MA - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
MD - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
MD - Engineer (General - ,)
ME - Engineer (General - ,)
MI - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
MI - Contractor, Residential Builder and M & A (General)
MI - Engineer (General - ,)
MN - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
MN - Engineer (General - ,)
MO - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
MS - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
MS - Contractor, Residential (General)
Accreditation: This course, Structural Insulated Panels (SIPs), has been approved by the Mississippi State Board of Contractors for 1 hour of continuing education credit.
MS - Engineer (General - ,)
MT - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
MT - Engineer (General - ,)
NC - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
NC - Engineer (General - ,)
ND - Engineer (Health, Safety & Welfare - ,)
NE - Architect (General, Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program
NH - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
NH - Engineer (General - ,)
NJ - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
NM - Engineer (General - ,)
NV - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
NV - Engineer (General - ,)
NY - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.
OH - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
OH - Engineer (General - ,)
OK - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
OK - Engineer (General - ,)
OR - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
OR - Engineer (General - ,)
PA - Code Official,Certified (UCC) (General)
PA - Engineer (General - ,)
PR - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
PR - Engineer (General - ,)
RI - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
SC - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
SC - Engineer (General - ,)
SD - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
TN - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
TN - Engineer (Health, Safety & Welfare - ,)
TX - Architect (Sustainable Design / Energy-Efficient Design - RV1986-2027)
Accreditation: AIA Registered Provider J315
TX - Engineer (General - ,)
UT - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
UT - Engineer (General - ,)
VA - Architect (General - RV1986-2027)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
VT - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
VT - Engineer (General - ,)
WA - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
WI - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
WV - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
WV - Engineer (General - ,)
WY - Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Institute of Architects - AIA - Architects (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - Alberta Architect (General - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia - Residential Builder (General)
Canada - British Columbia Architect (AIBC) (Core - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Architect (Health, Safety & Welfare - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV1986-2027)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
International Society of Automation - ISA - Certifications (General)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)