RedVector RV-10793AW

Pier and Beam Foundation Design

Pier and Beam Foundation Design

2 hrs. Online Course

Level: Advanced

Item#: RV-10793AW

SME: William Coulbourne, P.E., F. ASCE, F. SEI

This course will provide technical information important in the design of pier and beam foundation systems. The design process will focus on how to apply wind and flood loads to these foundation systems using ASCE 7-10, ASCE 24, the Wood Frame Construction Manual and the International Building Codes. The use of the masonry code will also be covered. An example is included that uses elements of each of the important references. Design methods for these foundations are not covered in most structural engineering programs at the university level and have not been found in any practice journals. While the design wind loads are frequently determined for buildings, the distribution of these loads to the foundation and supporting soil and the inclusion of flood loads are important and crucial elements of the design process.
Course Objectives
At the end of this course, you will be able to:
  • Apply the flood load provisions in ASCE 7-10 and ASCE 24 to properly design pier and beam foundations that are safe for its occupants
  • List the provisions, updates, and proposed changes to ASCE 7-10 and ASCE 24 that will affect the safety of the public
  • Identify the minimum design and construction standards for pier and beam foundation design that will provide the most safety to the public.
  • Recognize the limitations for prescriptive solutions in foundation design to assist in identifying issues that require thorough analysis
  • State the current design methodologies for pier and beam foundation issues used for both riverine buildings.
SUBJECT MATTER EXPERT: William Coulbourne, P.E., F. ASCE, F. SEI
William Coulbourne, P.E., F. ASCE, F. SEI Photo
Mr. Coulbourne has a BS in Civil Engineering from Virginia Tech and a Masters in Structural Engineering from the University of Virginia. He is a licensed Professional Engineer in three states. He is a national expert in wind and flood mitigation and has been involved in FEMA Mitigation Assessment Teams and natural hazard damage assessments for 20 years. He has been involved as an investigator or Project Manager with every major hurricane, tornado and flood since 1995, and was involved in a building collapse caused by terrorism and a tsunami in Japan. He has investigated failures and mitigation design techniques for thousands of buildings including residential structures, schools used as shelters, hospitals, and other critical facilities. He holds Certifications in Structural Engineering and Building Inspection Engineering.

Mr. Coulbourne has written articles for journals and given presentations, seminars and webinars for homebuilders, engineers, architects, building officials and homeowners on high wind and flood design and coastal construction issues and has taught as an Adjunct Faculty member in the College of Engineering at the University of Delaware. He was the primary author and Project Manager for FEMA 55: Coastal Construction Manual. He has co-authored books and journal articles on high wind design issues and strategies including Guides to the Wind Load Provisions of ASCE 7-05 and ASCE 7-10, an ATC Design Guide on Basic Wind Engineering for Low-Rise Buildings and a book on Engineering Investigations of Hurricane Damage for ASCE. He is a Fellow of the American Society of Civil Engineers (ASCE) and a Fellow in the Structural Engineering Institute of ASCE. He actively participates on the ASCE engineering standards committees for ASCE 7 Minimum Design Loads for Buildings and Other Structures, ASCE 24 Flood Resistant Design and Construction, and a new standards committee for improving tornado wind speeds using the EF Scale.
 
Mr. Coulbourne is a member of the Florida International Wall of Wind Technical Advisory Panel, a member of an Expert Panel for the Texas Department of Insurance investigating methods for determining hurricane damage caused by wind and water, a member of ABET’s Engineering Accreditation Commission Executive Committee, a Board Member of the American Association of Wind Engineering, and a newly elected member into the Academy of Distinguished Alumni of the Via Department of Civil Engineering at Virginia Tech.
State Licenses
AK - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
AK - Engineer (Health, Safety & Welfare - ,)
AL - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
AL - Engineer (General - ,)
AR - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
AR - Engineer (General - ,)
CO - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
CT - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
DC - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
DC - Engineer (General - CE21800018)
DE - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
DE - Engineer (General - ,)
FL - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
FL - Building Code Administrator (General - 5007888)
Accreditation: FL DBPR Approved Provider 0001771
FL - Engineer (General - 0000272)
Accreditation: FBPE Approved Provider 33
FL - Examiner (General - 5007888)
Accreditation: FL DBPR Approved Provider 0001771
FL - Inspector (General - 5007888)
Accreditation: FL DBPR Approved Provider 0001771
GA - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
GA - Engineer (General - ,)
HI - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
IA - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
IA - Engineer (General - ,)
ID - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
ID - Engineer (General - ,)
IL - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
IL - Engineer, Professional (General - ,)
IL - Engineer, Structural (General - ,)
IN - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
IN - Engineer (General - Board Approved - CE21800018)
KS - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
KS - Engineer (Health, Safety & Welfare - ,)
KY - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
KY - Engineer (General - ,)
LA - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
LA - Engineer (General - ,)
MA - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
MD - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
MD - Engineer (General - ,)
ME - Engineer (General - ,)
MI - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
MI - Engineer (General - ,)
MN - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
MN - Engineer (General - ,)
MO - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
MO - Engineer (General - ,)
MS - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
MS - Engineer (General - ,)
MT - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
MT - Engineer (General - ,)
NC - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
NC - Engineer (General - ,)
ND - Engineer (Health, Safety & Welfare - ,)
NE - Architect (General, Health, Safety & Welfare)
Accreditation: Vector Solutions is authorized by IACET to offer 0.20 CEUs for this program
NE - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.20 CEUs for this program
NH - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
NH - Engineer (General - ,)
NJ - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
NJ - Engineer (General - 24GP000006300)
NM - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
NM - Engineer (General - ,)
NV - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
NV - Engineer (General - ,)
NY - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
NY - Engineer (General)
Accreditation: Vector Solutions is authorized by IACET to offer 0.2 CEU for this program.
OH - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
OH - Engineer (General - ,)
OK - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
OK - Engineer (General - ,)
OR - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
OR - Engineer (General - ,)
PA - Engineer (General - ,)
PR - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
PR - Engineer (General - ,)
RI - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
SC - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
SC - Engineer (General - ,)
SD - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
SD - Engineer (Technical - ,)
TN - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
TN - Engineer (Health, Safety & Welfare - ,)
TX - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
TX - Engineer (General - ,)
UT - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
UT - Engineer (General - ,)
VA - Architect (General - RV1913-2027)
Accreditation: AIA Registered Provider J315
VA - Engineer (General - ,)
VT - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
VT - Engineer (General - ,)
WA - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
WI - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
WI - Engineer (General - ,)
WV - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
WV - Engineer (General - ,)
WY - Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
WY - Engineer (General - ,)
Professional Organizations
American Academy of Environmental Engineers - AAEES - Member (General - ,)
American Institute of Architects - AIA - Architects (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
American Society of Civil Engineers - ASCE - Academy of Coastal, Ocean, Port & Navigation Engineers (ACOPNE) (General)
American Society of Civil Engineers - ASCE - Academy of Geo-Professionals (AGP) (General)
American Society of Civil Engineers - ASCE - American Academy of Water Resources Engineer (AAWRE) (General)
Association of State Floodplain Managers - ASFPM - Certified Floodplain Manager (Core)
Canada - Alberta Architect (General - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - Alberta Engineer (General - ,)
Canada - British Columbia Architect (AIBC) (Core - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - British Columbia Engineer (General - ,)
Canada - Manitoba Architect (General - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - Manitoba Engineer (General - ,)
Canada - New Brunswick Architect (General - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - New Brunswick Engineer (General - ,)
Canada - Newfoundland and Labrador Architect (Health, Safety & Welfare - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - Newfoundland and Labrador Engineer (General - ,)
Canada - Northwest Territories and Nunavut Engineer (General - ,)
Canada - Northwest Territory Architect / Restricted Practitioner (General - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Architect (General - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - Nova Scotia Engineer (General - ,)
Canada - Ontario Architect (General - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - Ontario Engineer (General - ,)
Canada - Prince Edward Island Architect (General - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - Prince Edward Island Engineer (General - ,)
Canada - Quebec Architect (General - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - Quebec Engineer (General - ,)
Canada - Saskatchewan Architect (General - RV1913-2027)
Accreditation: AIA Registered Provider J315
Canada - Saskatchewan Engineer (General - ,)
Canada - Yukon Engineer (General - ,)
International Society of Automation - ISA - Certifications (General)
National Institute for Certification in Engineering Technologies - NICET (General - ,)
Ontario Association of Certified Engineering Technicians and Technologists - OACETT - Certified Member (Contribution to Technical Knowledge)