LEED v4 for Interior Design + Construction

$29.95

add to cart Get More With a Subscription! Request a Demo For Your Company

Green buildings, when operated as intended, improve working environments, promote higher productivity, reduce energy and resource costs, and prevent system failures. This interactive course discusses the importance of a facility that has been designed and built as not only “green” with energy efficiency and water consumption technologies but also allows us to breathe easy, give us views of nature and daylight, and makes us healthier. LEED for Interior Design and Construction (LEED ID+C) enables project teams who may not have control over whole building operations to develop indoor spaces that are more comfortable for users and more mindful of our resources.

Objectives SME Course Applies to

Course Objectives

At the end of this course you will be able to:

List the environmental, economic, and wellness benefits of higher efficiency and healthier buildings
Describe the USGBC's LEED for Interior Design and Construction Rating System and how to achieve your green building goals
Describe typical considerations for LEED ID+C certification that will increase the environmental integrity of your building
Recognize the key market sectors for LEED ID+C and their role in green interior design

SUBJECT MATTER EXPERT: Rumanda Young, Ph.D.

Dr. Young is a Registered Landscape Architect (RLA) in the state of Texas and a Certified Planner (AICP). She holds a bachelor’s degree in landscape architecture (BLA) from the University of Arkansas, a master’s degree in city and regional planning (MCRP) with environmental planning emphasis from the University of Texas at Arlington, and a Ph.D. in urban planning and public policy. Dr. Young also spent time abroad in Cheltenham, England at the University of Gloucestershire focusing on sustainable development practices, environmental planning, and resource management.

Dr. Young has eight years of private practice experience, six of which working with the firm Carter & Burgess, Inc. She was involved in a variety of work including a wide range of park and recreational planning and design projects. Landscape Architectural experience ranges from preparation of detail site design plans, inventory and analysis documents, park, recreation and open space master plans, city-wide comprehensive plans, interpretive prospectus documents, construction document preparation, and preparation of grant applications and rezoning applications for cities throughout Texas, Louisiana, North Carolina and Oklahoma.

Dr. Young currently works as a Military Master Planner with the U.S. Army Corps of Engineers, in the Planning, Environmental, and Regulatory Branch. Dr. Young is involved in a variety of work including a wide range of military planning, programming, and design projects. Project Management experience ranges from installation design guides to campus master plans. Projects also focus on the impacts of development on human health and the environment, and improvements through better siting, design, construction, operation, and maintenance of military projects.

Dr. Young is also an adjunct professor at the University of Texas at Arlington, School of Architecture. She teaches master’s level landscape architecture design studio course(s).

State Licenses

Alaska

AK - Engineer (Health, Safety & Welfare - ,)

Alabama

AL - Engineer (General - ,)

Arkansas

AR - Engineer (General - ,)

District Of Columbia

DC - Engineer (General - CE21800018)

Delaware

DE - Engineer (General - ,)

Florida

FL - Engineer (General - 0000271)

FL - Interior Designer (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Georgia

GA - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

GA - Engineer (General - ,)

Iowa

IA - Engineer (General - ,)

Idaho

ID - Engineer (General - ,)

Illinois

IL - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

IL - Engineer, Professional (General - ,)

IL - Engineer, Structural (General - ,)

Indiana

IN - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

IN - Engineer (General - Board Approved - CE21800018)

Kansas

KS - Engineer (Health, Safety & Welfare - ,)

Kentucky

KY - Engineer (General - ,)

Louisiana

LA - Engineer (General - ,)

Maryland

MD - Engineer (General - ,)

Maine

ME - Engineer (General - ,)

Michigan

MI - Engineer (General - ,)

Minnesota

MN - Engineer (General - ,)

Missouri

MO - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

MO - Engineer (General - ,)

Mississippi

MS - Engineer (General - ,)

Montana

MT - Engineer (General - ,)

North Carolina

NC - Engineer (General - ,)

North Dakota

ND - Engineer (Health, Safety & Welfare - ,)

Nebraska

NE - Architect (General, Health, Safety & Welfare)

Accreditation: Vector Solutions is authorized by IACET to offer 0.10 CEUs for this program

NE - Architect (General, Health, Safety & Welfare - RV2072-2025)

Accreditation: AIA Registered Provider J315

NE - Engineer (General)

New Hampshire

NH - Engineer (General - ,)

New Jersey

NJ - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

NJ - Engineer (General - 24GP000006300)

New Mexico

NM - Engineer (General - ,)

Nevada

NV - Engineer (General - ,)

New York

NY - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

NY - Engineer (General)

Accreditation: Vector Solutions is authorized by IACET to offer 0.1 CEU for this program.

Ohio

OH - Engineer (General - ,)

Oklahoma

OK - Engineer (General - ,)

Oregon

OR - Engineer (General - ,)

Pennsylvania

PA - Engineer (General - ,)

Puerto Rico

PR - Engineer (General - ,)

South Carolina

SC - Engineer (General - ,)

South Dakota

SD - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

SD - Engineer (Technical - ,)

Tennessee

TN - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

TN - Engineer (Health, Safety & Welfare - ,)

Texas

TX - Engineer (General - ,)

Utah

UT - Engineer (General - ,)

Virginia

VA - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

VA - Engineer (General - ,)

Vermont

VT - Engineer (General - ,)

Washington

WA - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Wisconsin

WI - Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

WI - Engineer (General - ,)

West Virginia

WV - Engineer (General - ,)

Wyoming

WY - Engineer (General - ,)

Professional Organizations

American Academy of Environmental Engineers - AAEES - Member (General - ,)

American Council for Accredited Certification - ACAC - Member (General)

Accreditation: RedVector is an independent course provider not affiliated with the American Council for Accredited Certification (ACAC). ACAC does not develop, accredit or approve training courses, nor does it contract with course providers.

American Hospital Association - AHA - Certified Healthcare Facility Manager (CHFM) (General)

American Institute of Architects - AIA - Architects (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

American Institute of Certified Planners/American Planning Association - AICP - Certified Planners (General - 9277653)

Association of Energy Engineers - AEE - Certification (Technical)

Canada - Alberta Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Canada - Alberta Engineer (General - ,)

Canada - British Columbia Architect (AIBC) (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Canada - British Columbia Engineer (General - ,)

Canada - Manitoba Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Canada - Manitoba Engineer (General - ,)

Canada - New Brunswick Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Canada - New Brunswick Engineer (General - ,)

Canada - Newfoundland and Labrador Engineer (General - ,)

Canada - Northwest Territories and Nunavut Engineer (General - ,)

Canada - Northwest Territory Architect / Restricted Practitioner (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Canada - Nova Scotia Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Canada - Nova Scotia Engineer (General - ,)

Canada - Ontario Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Canada - Ontario Engineer (General - ,)

Canada - Prince Edward Island Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Canada - Prince Edward Island Engineer (General - ,)

Canada - Quebec Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Canada - Quebec Engineer (General - ,)

Canada - Saskatchewan Architect (General - RV2072-2025)

Accreditation: AIA Registered Provider J315

Canada - Saskatchewan Engineer (General - ,)

Canada - Yukon Engineer (General - ,)

Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP BD+C) (General - 0920030637)

Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP Homes) (General - 0920030637)

Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP ID+C) (LEED Specific - 0920030637)

Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP ND) (General - 0920030637)

Green Business Certification Inc. - GBCI - LEED Accredited Professional (AP O+M) (General - 0920030637)

Green Business Certification Inc. - GBCI - LEED Green Associate (GA) (LEED Specific - 0920030637)

Green Business Certification Inc. - GBCI - WELL Accredited Professional (AP) (General - 0920030637)

International Facility Management Association - IFMA - Certified Facility Manager (CFM) (General)

International Maintenance Institute - IMI - Certifications (CMT, CMP, CMM, CWWMT) (General)

National Institute for Certification in Engineering Technologies - NICET (General - ,)